Daewoo IC Forklifts San Francisco

Inspect a Forklift

There are over 10,000 workplace injuries connected to forklifts occur each year, according to OSHA and HRSDC reports. Many of these accidents are caused by driver error. Lack of proper equipment maintenance and check causes numerous others. Maintenance and operation of a forklift is not just the cause of personal injuries, but also of damage to property. Forklifts can damage sprinklers, building structures and overhead pipes, and other machinery when incorrectly used. The following daily inspections must be done so as to reduce the likelihood of forklift accidents.



Before inspecting different fluid levels turn off the engine. Inspect these fluids: fuel, engine oil, hydraulic oil, coolant and brake fluid. The tires also have to be checked for indications of wear and tear. Check the air pressure in the tires. Check the forks' condition. The load backrest should be attached securely. Do a visual check of the top-clip retaining heel and pin. After that perform an inspection of the hydraulic hoses, mast chains, stops and cables. Ensure that the overhead and finger guards are attached firmly.



LP forklifts have propane tanks that have to be inspected for indications of damage, rust or corrosion. Test the battery's charge and electrolyte levels. All belts must be checked for wear. Check to make certain the owner's handbook is stored on-board the forklift in a storage compartment. Check the seat belt to make certain the latches are secure. Test the hood latch to make sure that it is functioning as it should.



Start the forklift and listen to the engine noise to make certain there are no unusual sounds. If there are, investigate promptly. Check the steering controls and the accelerator. The service brake and the parking break must be correctly working.



To guarantee proper functioning in both reverse and forward, the tilt control and drive control should be checked. The functioning of the hoist, the lowering control and attachment control needs periodic inspection. Check the lights and horn. Then check the defroster, wipers and heater to make certain they are functioning well. Inspect each and every gauge to find out that it is reading within functional limits.

• Terex Man Lifts San Francisco
  Terex Manlift Specifications Terex is a Westport, Connecticut company which specializes in making in manufacturing construction machinery. Machines such as manlifts, boom lifts and aerial lifts. These types of machines are designed to facilitate access... More
• Haulotte Rough Terrain Scissor Lifts San Francisco
  Traditionally, industrial lifts have been used in production and manufacturing settings to raise and lower work things, people and materials. The scissor lift, also referred to as a table lift, is an industrial lift which... More
• JLG Zoom Boom San Francisco
  To handle all of your rough terrain difficulties, JLG offers the 400 Series and its fastest drive and lift speeds in its class which will ensure a boost in production. You would be able to... More
• Omega Rough Terrain Forklifts San Francisco
  MEGA Series - The MEGA Series is a powerful lift truck which is capable of covering a variety of applications. From steel and lumber and dealing with other kinds of heavy lifting as much as... More
• Toyota Counterbalance Forklift San Francisco
  For over 4 decades, Toyota has been among the leading suppliers of innovative lift trucks in the industry. Up to date, the business has sold more than 1 million forklifts. The company has earned a... More